3 Counties 3.5 ton horsesboxes for sale
homeAbout Us3.5 ton horsebox pictures3.5 ton horsebox specificationHi-top_3.5_ton_horseboxes_for_sale3.5 ton horseboxes for sale


THREE COUNTIES HORSEBOXES
The Hop Kilns Rhyse Lane
Tenbury Wells, Worcestershire.
WR15 8NH.
Tel:07985 811 311 / 07968 265 561

ALSO BASE IN SOMERSET




 SPECIFICATIONS OF  "PART CONVERSION" CAN-VAN

The Part conversions are available, really to allow you to get out and about at an affordable cost. They start at a VERY basic level which may not be to everyone's liking but it does give the chance for some people to at least have good safe reliable transport which is yours and enables you to be independent!

Our theory behind the Part conversion is ...... if your happy with the basic level great, another happy customer.  BUT the part conversions allow you to add to the spec at a later date as and when funds dictate.

 If you need the best Payload available we can do a Part conversion with 1350 kgs carrying

THIS IS THE MAXIMUM CARRYING CAPACITY YOU WILL GET ON ANY 3.5 TONNE VEHICLE BUILT FOR HORSE TRANSPORT.

We start at this base line to give everyone a chance to spend there money how they want. You can add to it if you are wanting a higher spec, New re-spray etc.... prices are stated below

Before ANY conversion is started all the vans are fully inspected before purchased and given an engine compression test to ensure that the engine is of a good standard, they are then serviced (all fluids and filters).The cam belt KIT is not included in the Part conversion price however we will check the condition of it for free and give you discounted prices if you would this to be done.

 

2011-04 part con

A Part Conversion (spec as above)  including the 2004 chassis starts from £8,750.00

 

 2011 MK 2 P con

A Part conversion (spec as above) including the Older shape chassis from £7,250.00

 

2011 BARN DOORS BLUE

The Vehicle above came in the original blue, it has the part conversion as below with the upgraded "Barn style" top doors as well as an upgraded interior.  

 

 


 INTERIORS OF THE PART CONVERSION start life looking like the below.......

Yes they are very basic but they are still safe and usable in this condition.......... Buying a horsebox is a big expense and we find that their are people out there wanting this sort of application to just get out and about and not have to spend all their hard earned money to do it.

2011 base P Con INT

The Customer supplied this vehicle and had a respray too. 

2011 BASE p Con INT

2011 base ply floor

This is what a Part Conversion interior will look like ........ you can upgrade the horse area to a standard spec for £850.00+vat, have the Aluminium flooring ( upgrade of £500.00 + vat) complete with drainage holes. The list is never ending but i hope you understand that we can do as little or as much as you and your horses require.

 

2000 purple

A purple & white horsebox like this with the Aluminium flooring and "Equi-mats" to pop on top will be £7,750.00 on the road ( year 2000 chassis full MOT and tax)  

PART CONVERSION SPEC 2011

For our  "CAN-VANS" are as follows: 
 

HORSE AREA for our Part conversions:

 

 

 

 

 

  • Adequate lighting

 

  • Light weight carpeted ramp and single style top door

 

  •  Optional choice of three breast bars ....... we recommend the open removable breast bar however you can choose a Half open breast bar or solid breast bar.

 

  • Tie rings etc

 

 

GROOMS AREA for our Part conversion
 

  • Unfitted for best payload, with easy clean cheek pieces made from the plasti-coated sheeting where you tie the horses so no sharp edges.

 

  •  Adequate lighting

 

 

EXTERIOR OF A Part convertion "CAN-VAN"

 

  •  Any steelwork that we fit is painted in a solid colour, the vehicle remains in the original factory colour which is usually white (upgrades available)

 

  • logos : the word "HORSES" front and rear.

 

 

  • A full service and cam belt change and conditions of warranty depending on year of chassis.

 

Depending on your requirements and chassis, prices start on the MK2 Renault Master 2000/2001. Subject to availability from £7,250.00 with the above PART CONVERSION specifications

 

The newer shape Renault Masters on the Facelift versions on a 2003/2004 subject to availability start from £8,750.00 with the above PART CONVERSION specifacations

** All prices above are inclusive v.a.t and chassis **

 

Height of our standard high top ideal for horses under 16.2HH

** Please note all measurements are approximate ** 

85 inches

Seven foot 1 inch

Horse area chest to tail length (this is our standard measurement we can alter this if you require)

78 inches

Six foot six inches

Tack area length (this would be the standard length from the horses breast bar to the rear doors movement of the breast bar dictates length of your groom area:

63 inches

Five foot three inches

Width for both above:

67 inches

Five foot seven inches

Height of Breast bar (this again is our standard height but we can alter as required)

48 inches

Four foot

 

If you where looking for a more completed Horsebox please vist the STANDARD SPEC page or see our upgrades listed here in Services

 

 

SORRY ABOUT THE LONG PAGE CLICK HERE TO JUMPBACK TO THE TOP!

 

 


 

 
 
 
  

RSS Feed Site Map